The
carbon fiber CF-UniBraket anti-vibration supports replace
the pesky metal pins of your existing cabinet shelves, providing
a very quiet environment for all your valuable components.
CF-Unibrakets eliminate the need to spend thousands of dollars
to upgrade your audio/video components. For a fraction of
the cost you can achieve incredible clarity and resolution
from all of your existing components and cabinet.
Specifications: 2" wide x 1.4" tall x 1.75" deep, 1/4" pin diameter (other
pin size are also available) $100
each - Part Number: 5128
Patent Pending
CF-Projektor
(New Product)
Vibration
dramatically distorts the video quality of your expensive
ceiling projector. Unavoidable sources of vibration such as
projector cooling fans, speakers and air conditioning units
can distort the light output. Even the smallest amount of
vibration is magnified and compromises picture quality. Place
a set of carbon fiber CF-Projektor units between your projector
and metal ceiling mount to dissipate unwanted vibration and
improve picture quality significantly.
Specifications: 1.5" diameter x 1.0" tall; diameter of internal thru hole
is .38" $50
each - Part Number: 5127
Patent Pending
CF-Cone
Anti-Vibration
Audio/Video cone to stand components on. Recommended for all
components especially CD/DVD players, turn tables, amplifiers
and pre-amps.
Specifications: 1.15" diameter x 0.87" thick laminated Carbon Fiber cone
$25 each - Part Number: 5020
Patent Pending
CF-Cone
w/ Threads
Anti-Vibration
Audio/Video carbon Fiber cone to replace the existing component's
feet.
Recommended for all components especially CD/DVD player, turn-tables,
amplifiers and pre-amps.
1.15" diameter x 0.62 thick laminated Carbon Fiber cut in
an optimum bias for anti-vibration purposes. It has a ¼"-20
thread to replace most existing components feet.
$35 each - Part Number:
5092
Patent Pending
CF-PadX
Anti-vibration
Audio/Video Pad to stand speakers on. Also for tuning of CD
players by placing it on top of the component.
Specifications:
One 3.1" diameter x 2.2" thick laminated Carbon Fiber cylinder
$300 each - Part Number: 5024
Patent Pending
CF-Disc
Anti-Vibration
Audio/Video carbon Fiber disc to match with CF-Cone.
1.15" diameter x 0.62 thick laminated Carbon Fiber cut in
an optimum bias for anti-vibration purposes.
$20 each - Part Number:
5097
Patent Pending
CF-Support
1
Anti-vibration
Carbon Fiber cone and Sorbothane ring for under all components,
especially as replacement feet for speaker stands.
1.5" diameter x 1.10" thick with 3/8-16 thread.
$75 each - Part Number:
5100
Patent Pending
CF-Isolator
CF-Isolator is
an Anti-Vibration Carbon Fiber/Sorbothane Isolator for all
components.
Compromised of Carbon Fiber Cone, a new Carbon Fiber Disc
with two types of Sorbothane in different thicknesses and
damping properties.
Carbon Fiber Cone and Disc are laminated with more than 100
layers and cut in an optimum bias angle. Extremely effective
to dissipate foot fall.
